Greg Ichshenko

Calgary SEO expert and digital marketing specialist,
developing advertising strategies for businesses of all sizes

(403) 308-5949

greg@to-the-top.ca
1509 14 Ave SW, Calgary,
AB T3C 0W4

    Submit your request or question, and I will get back
    to you shortly

    How Much Are My Competitors Spending on PPC? How to Estimate It

    If you want to know how much your competitors are spending on PPC, the exact figure is out of reach: nobody outside a competitor’s Google Ads account can see it, because Google keeps budgets and billing private and no tool reads them. What you can build is a range: the clicks your competitor probably gets on the keywords they show for, multiplied by the cost per click Google’s Keyword Planner reports for those keywords in your area. Clicks times cost per click is the whole formula. If you already advertise, Auction insights then shows how often that competitor appears in the same auctions as you, which tells you how much pressure they put on your account, and the rest of this guide shows how to do both and what to do with the result.

    A man drops a coin into an advertising machine

    Why the exact figure stays private

    A Google Ads budget lives inside the advertiser’s own account, and Google does not publish it. The closest Google comes is the Ads Transparency Center, and its advertiser verification page lists what becomes public about a verified advertiser: name change history, ad creatives, the dates and locations ads served, ads removed or accounts suspended for legal or policy reasons, and organization contact information. Spend is not on that list.

    That means every dollar figure you see in a tool, a forum post or a sales pitch is a reconstruction. It might be a good one, but it is built from assumptions about how many people searched, how many clicked and what each click cost. Once you know which assumptions sit underneath the number, you can judge how far to trust it, and you can usually build a better one yourself for a local market.

    A man climbs a set of rising bars on a chart

    How to estimate a competitor’s PPC spend, step by step

    The method has four steps, and each one is a place where you can tighten or loosen the range.

    1. List the keywords they appear on. Search your main service terms from the area you serve, on a few different days and times, and note which ones bring up the competitor’s ad. Add close variations, because a well-run account usually covers far more terms than the three obvious ones. If you have done proper keyword research for your own site, start from that list.
    2. Get monthly searches and a top of page bid range. Put the list into Keyword Planner inside a Google Ads account, set the location to your city and read the average monthly searches and the top of page bid range. Google defines the low end of that range as an approximation of the 20th percentile of what advertisers have historically paid for a top of page bid, and the high end as roughly the 80th percentile, based on your location and network settings. These are bids, not prices paid. Advertisers often pay less per click than they bid, so treat this band as a rough stand-in for cost per click that leans high, and use your own average CPC instead if you advertise on the same terms.
    3. Estimate how often they show and how often they get clicked. Out of every ten searches you run, count how many show their ad. That is a very rough guess at how much of the search volume they cover, not a measurement, so like the clickthrough rate it belongs in your assumptions rather than your facts. For the clickthrough rate, pick a low and a high assumption and write them down, because this is the weakest input in the whole estimate and you want to see how much it moves the answer.
    4. Multiply and keep the range. Searches times coverage gives impressions, impressions times clickthrough rate gives clicks, and clicks times that bid range gives monthly spend. Keep the low and high figures side by side rather than averaging them into one number.

    Here is how that looks for a Calgary home-service business. Every figure below is illustrative, chosen to show the arithmetic, not taken from a real account or a real Keyword Planner report.

    Input Low case High case
    Combined monthly Calgary searches for 12 keywords 2,000 2,000
    Share of your checks where their ad appeared (6 of 10) 60% 60%
    Estimated impressions 1,200 1,200
    Your clickthrough rate assumption 4% 8%
    Estimated clicks 48 96
    Keyword Planner top of page bid range $8 $24
    Estimated monthly spend (CAD) $384 $2,304

    The high case is six times the low case, and that spread is the most useful thing the exercise tells you. It shows that the competitor could be a modest local advertiser or a serious one, and that a tool printing a single figure like “$1,340 a month” is hiding the same uncertainty behind a precise-looking number. You can narrow it with more checks, a tighter keyword list and your own clickthrough rate if you advertise on the same terms, but it will remain a range. It also misses any keywords you did not think to check, which is why estimates for large advertisers tend to come in low.

    A man paints a target and a rising chart on a large sheet

    What Auction insights can and cannot tell you

    If you run Search campaigns, the Auction insights report is the best data you will get, because it comes from Google and describes auctions you actually entered. It is available for Search, Shopping and Performance Max campaigns that meet a minimum threshold of activity. In a Search campaign report, for each advertiser who competed with you, it shows impression share, overlap rate (how often their ad received an impression when yours did), position above rate (how often their ad showed above yours when both showed), outranking share and top of page rates.

    What it does not show is money, and the popular shortcut for turning it into money does not hold up. Several guides suggest dividing your spend by your impression share to get the “market total”, then multiplying by the competitor’s impression share. Google’s own help page explains why that fails: the competitor’s impression share in your report is measured against their eligible auctions, and their eligible auctions may only partly overlap with yours. Google’s example is a competitor who shows 100% in your report but may have a 50% impression share across all the auctions they were eligible for. On top of that, two advertisers in the same auction rarely pay the same amount per click.

    That last point comes down to how the auction works. Google calculates Ad Rank from your bid, the quality of your ad and landing page measured at the time of each search, the Ad Rank thresholds, the competitiveness of the auction, the context of the search and the expected impact of your assets. The Quality Score you see in your account is a separate 1 to 10 diagnostic, and Google states it “is not an input in the ad auction.” A competitor with a stronger ad and landing page can hold the same positions as you while paying less per click, so equal visibility does not mean equal spend.

    Used for what it is, Auction insights is still valuable. A competitor whose overlap rate climbs month after month is showing up in more of your auctions, whether through a bigger budget, higher bids or wider targeting, and one whose position above rate is high is winning the top spots you are paying for. Those trends tell you more about pressure on your own account than a dollar estimate would.

    A man points to a board of sticky notes labelled Ads, Spend, Clicks, Impressions, Bid and Rank

    Third-party tools give you a starting range

    Semrush, SpyFu, Similarweb and similar tools estimate paid traffic and paid keywords for a domain and attach a cost to it from their own models, and each describes its method differently. They are quick, they show which keywords a competitor has been seen bidding on, and their history can reveal when a competitor started or stopped advertising. Semrush’s own guide on the subject presents its figures as estimates and suggests combining them with your own data.

    The weakness for a Calgary business is scale. In practice, these tools sample keywords from large databases, and the city-level, low-volume searches that drive most local service leads are the ones they see least clearly. Treat a tool’s monthly figure as one more input to your own range, not as the answer, and lean on its keyword lists more than its dollar totals. There is a separate guide to the free and paid tools that show competitor ads if you want to compare them in detail.

    A smiling man holds a folder with a shield and star on the cover

    Signals that tell you more than the dollar figure

    Some of the most useful evidence costs nothing and needs no account. Search the same terms on a weekday morning and again on a weekend afternoon. An advertiser who shows at both times probably has a budget that lasts through the day, while one who only appears in the morning may be running out of daily budget, scheduling ads around business hours or simply losing those later auctions. Repeat the check in a slow month and a busy one, because a seasonal business pausing in its off season is making a choice, not running out of money.

    The Ads Transparency Center adds a second layer. Look the competitor up by name or domain and count how many different ads they are running and how long each one has been live. Many variations with recent dates suggest someone is actively working on the account, while one ad that has run unchanged for years suggests it gets less attention, though it may simply be working.

    Then follow the ad to where it lands. A competitor sending clicks to a page built for that one service, with a clear offer and a short form, treats paid search as a serious channel. One sending every click to a generic home page may not be treating paid search as a priority, or may be getting less from each click. These signals belong in a fuller competitor analysis alongside their keywords and ad copy, because together they show how well the money is used, which matters more to you than how much of it there is.

    A man stands beside a balance scale with a coin on one side and weights on the other

    Set your budget from your numbers, not theirs

    Matching a competitor dollar for dollar is a common mistake, because their margins, close rate and goals are not yours, and you are copying a number you only estimated. A sounder approach starts with what a lead is worth to you. As an illustration, if an average job leaves $400 of gross margin and one lead in four becomes a job, each lead is worth about $100 to you before any profit, so you might aim to pay $50 or less per lead. If you want 20 leads a month at that cost, your starting budget is around $1,000 a month in this example.

    The competitor estimate then adjusts the plan rather than setting it. If your range says a rival spends several times your budget on the same keywords, you might narrow your keyword list, your hours or your service area so that your budget covers a smaller set of auctions properly, instead of thinly covering all of them. If the range is small and their landing pages are weak, there may be room to take a bigger share of the searches that matter. Either way, the market itself still sets the cost of each click, and a general guide to what PPC typically costs helps you sanity-check the plan.

    If you would rather have someone build and run that estimate inside a live account, SEO Company To-The-TOP! is a Calgary solo practice founded in 2007 that is Google Ads certified, so the person who reads your Auction insights is the person managing the account. With any provider of Google Ads management, To-The-TOP! included, ask for the management fee and the ad spend as two separate numbers before you compare offers, and call (403) 308-5949 if you would like to talk it through.

    Contact Calgary SEO Company To-The-TOP!

    Questions about anything in this article, or about your own rankings? Talk to a Calgary SEO specialist directly.

    Phone: (403) 308-5949
    Address: 1509 14 Ave SW, Calgary, AB T3C 0W4

    Hours:
    Monday to Friday: 10:00 am – 7:00 pm
    Saturday: 12:00 pm – 4:00 pm
    Sunday: closed