How to Use Geographic Targeting in PPC Campaigns
Geographic targeting in a PPC campaign comes down to three settings and one report in Google Ads: the locations you target, the location option that decides whether Google counts only people who are physically there or also people who have shown interest in the place, the locations you exclude, and the Locations report that shows which places your ads were matched to. Set the three in that order, then shift budget between areas once the report has enough clicks and conversions to compare them. The default option, “Presence or interest”, suits businesses whose customers travel to them, such as hotels and tour operators, while most local service businesses are better served by “Presence”.
This guide walks through each setting with Google’s documentation linked, and then applies it to businesses in Calgary and the rest of Alberta, where the city’s satellite towns and Canadian postal codes both change the right answer. The examples are for Search campaigns, and other campaign types differ in places, such as Hotel campaigns, which use Presence only. The setting names come from Google Ads Help as of November 2026. Google moves menus around from time to time, so check the labels in your own account as you go.

How Google Ads works out where a searcher is
Google cannot see where a person is standing, so it works it out. Its page About targeting geographic locations says physical location is typically based on the IP address and, depending on the person’s settings, on device location from GPS, Wi-Fi, Bluetooth or Google’s cell tower database. Separately, Google identifies a “location of interest” from the terms used in a search, past searches, a person’s past physical locations, the content of the page where a Display ad appears, searches on Google Maps and a custom location set for search results. Location of interest is not limited to the person’s own country, so someone in Toronto searching for “Calgary roofers” can count as interested in Calgary.
Two more details on the same page matter for smaller markets. When you target an area, Google may also show your ad in nearby, closely related areas that cannot be targeted on their own because of low population or too little data. Google also says that location targeting is its “best effort” and that 100% accuracy is not guaranteed in every situation, which is why the report in step 4 tells you more than the map in step 1 does. A few clicks from outside your area are normal, while a steady share of your budget going there points to a setting that needs changing.

Step 1: Choose the locations you target
Google’s page Target ads to geographic locations describes three levels of target: whole countries, areas within a country (regions, cities, postal codes and similar, depending on the country), and a radius around an address. In the account, the targets sit in the campaign’s Settings, under Locations. Countries suit a business that sells or ships everywhere in them. Areas within a country suit a business that serves particular cities or regions. A radius suits a business whose customers come from a certain distance around one place, such as a clinic, a restaurant or a delivery service.
A few rules shape the choice. A radius has to be at least 1 km, because Google only allows targets that meet its minimum privacy thresholds for area and number of users. Google also warns that a small radius or a very small location may show your ads only intermittently or not at all, so a tight circle around a single neighbourhood can leave a campaign with almost no impressions. Target the places where your customers are, which is not always where your business sits: an online store should target everywhere it ships. Keep language targeting consistent with the location too, which in Canada usually means deciding on purpose whether French-language searchers belong in the campaign.
In Canada, the targets are more detailed than many advertisers expect. Google’s published list of location targets (the Google Ads API geotargets file dated October 6, 2026) includes provinces, cities, neighbourhoods, airports and universities, and postal codes at the three-character level, such as T2P for downtown Calgary. The list also contains about 1,100 full six-character postal codes, but they are scattered across the country, with only 11 starting with Calgary’s T2 and T3 prefixes in the October 2026 file, so a plan built on targeting individual postal codes will not work as written, and the three-character codes are the finest postal level most Canadian campaigns can rely on.

Step 2: Choose between Presence and Presence or interest
The location options, under Locations in the same campaign settings, hold the choice that decides who counts as being in your area. Google’s page on advanced location options describes two targeting options. “Presence or interest” reaches people who are in or regularly in your targeted locations as well as people who have shown interest in them; it is the default, and Google recommends it. “Presence” reaches only people who are in or regularly in the targeted locations. Older guides describe a third option that targeted search interest alone, but Google has retired it, and it can no longer be set on Search, Display or Shopping campaigns.
Google gives its reasons for the default. It says advertisers in the Travel, Real Estate and Education verticals who switched from Presence to Presence or interest saw 5% more conversions on Search campaigns (Google internal data, global, May to June 2022), and that most campaigns see fewer impressions when they move away from the default. It also says Presence makes sense when you only want to reach people in specific locations rather than people elsewhere who are interested in your product or service. Hotel campaigns use Presence only.
The practical test is whether your customers travel toward you before they buy. A hotel in Banff, a wedding venue in Canmore or a moving company taking jobs into Calgary sells to people who are somewhere else when they search, and removing interest would remove real demand. A furnace repair company, a walk-in clinic or a mobile mechanic cannot serve someone in Halifax who happens to be reading about Calgary, so Presence is usually the safer choice for them, and the Locations report in step 4 will show whether it was the right one.

Tourism is the clearest case for leaving interest switched on. As an illustration, an Edmonton tour operator could target Edmonton with Presence or interest, so that someone in Vancouver or Seattle planning a trip can see its ads when they search for things to do in Edmonton, and run a separate campaign with its own budget that targets the cities its visitors actually come from. In that set-up the keywords carry the place name, the interest setting lets Google match a searcher anywhere to that place, and the two campaigns report separately, so the operator can see whether people already in Edmonton or people planning a visit produce more bookings.

Step 3: Add location exclusions
Exclusions remove areas inside the places you target. Google’s page on excluding locations gives the typical uses: a business that does not serve one city or region inside a larger target, or a promotion that does not apply in some regions. If an area is both targeted and excluded, the exclusion wins, so excluding Alberta while targeting Calgary removes Calgary as well.
Exclusions now work on Presence only. Google’s advanced location options page says excluded locations keep your ads away from people likely to be located in them, that people located outside those areas may still see your ads, and that exclusions can no longer be set to Presence or interest on Search, Display, Performance Max or Shopping campaigns. Advice that tells you to exclude a city by interest, to block people who are researching it, describes a setting that no longer exists.
That changes how exclusions should be used. Google notes that you normally do not need to exclude areas you never targeted, with one exception: when you target by interest, people outside your area can still reach your ads, and an exclusion only removes people located in the excluded place. If a Calgary campaign on Presence or interest keeps paying for clicks from Ontario, excluding Ontario will stop the clicks from people located there, but for a business that only serves Calgary the cleaner fix is to switch the targeting itself to Presence.

Step 4: Check where the ads actually ran
Once a campaign has run for a few weeks, the Locations report shows what your settings bought. Google’s page on measuring geographic performance describes two views. “Targeted locations” shows performance by the locations you chose, while “Matched locations” shows performance by the locations where your ads appeared, and Google points out that these can be people’s physical locations or their locations of interest, so the view does not prove where a person was sitting when they clicked. The “Most specific location” column shows the most detailed location Google used to match the ad, and an “Unspecified” row covers searches it could not place.
A simple check works well here. Open the Matched locations view for the last 90 days, sort by cost, and add up what the campaign spent on places outside your service area, then divide that by its total cost. If the share is small, your settings are doing their job. If it is large, look at the location option first and then at the keywords, because a keyword that names a place, such as “Toronto movers”, attracts interest in that place whatever the radius says. Keep in mind Google’s note that metrics below country level may not add up to campaign totals, since some impressions are matched only at country level.
This check belongs in every PPC audit, and it is worth repeating whenever someone duplicates a campaign, because a copied campaign carries its location settings with it. If you already record leads by source, compare the report with the way you track PPC campaign performance, so that a location that sends clicks but no enquiries stands out.

Step 5: Adjust by location without fighting Smart Bidding
There are a few ways to send more or less money to a place, and the bid strategy decides which of them works. Location bid adjustments raise or lower bids for a location by -90% to +900%, according to Google’s page on bid adjustments, and when two location adjustments cover the same place, only the most specific one is used, so an adjustment for Calgary overrides one for Alberta for people in Calgary. They apply with Manual CPC and with Maximize clicks. Under Smart Bidding (Maximize conversions, Target CPA, Maximize conversion value and Target ROAS), Google says manual bid adjustments are not supported, because those strategies set their own bid in every auction for the conversion goal you choose.
For most accounts on Smart Bidding, then, the control that still works is campaign structure. Google’s page Refine your location targeting suggests separate campaigns for your best-performing areas so they can have their own budgets, along with ad text and landing pages written for each area. A Calgary business that does most of its work in the city but also takes jobs in Airdrie and Okotoks could run one campaign for Calgary and a smaller one for the surrounding towns, each with its own budget and its own Locations report.
Two newer features are worth knowing about. AI Max for Search campaigns has an optional ad group setting called locations of interest, which limits matching to people searching for or interested in specific places while still requiring them to meet the campaign’s own location targeting, as described on Google’s location targeting page linked in step 1. Location assets add your business address to your ads, and they also make a distance report available that shows how performance changes with distance from your business.

Geographic targeting for Calgary and Alberta businesses
Calgary’s map makes these choices concrete. Google’s list of location targets treats Calgary, Airdrie, Chestermere, Cochrane, Okotoks, Strathmore and High River as separate cities, and it also has a “Calgary Metropolitan Area” target. Inside the city it offers Northwest, Northeast and Southeast Calgary as targets, but the October 2026 list has no Southwest Calgary target, so a business focused on the southwest quadrant has to build its area from the three-character postal codes that cover it or from a radius.
Province-wide targeting is usually too wide for a Calgary service business, because targeting Alberta puts its ads in front of searchers in Grande Prairie and Fort McMurray, hundreds of kilometres from a Calgary crew. A city target suits most service businesses, since people tend to search with the city name and the city target lines up with that, while a radius suits a business whose costs rise with every kilometre it travels. The table below shows how the steps above might combine for a few typical businesses. These are illustrations of the decision, not results from particular accounts.
| Business (illustrative) | Locations to target | Location option | Reason |
|---|---|---|---|
| Furnace repair serving Calgary and nearby towns | Calgary, Airdrie, Chestermere and Cochrane as city targets, in separate campaigns if the towns need their own budget | Presence | The customer has to be where the technician can drive |
| Dental clinic in a southwest Calgary community | A radius of a few kilometres, or the three-character postal codes around the clinic | Presence | Patients come from nearby; watch a small radius for low volume |
| Banff tour operator | Banff for people searching about the destination, plus separate campaigns for the cities visitors come from | Presence or interest on the destination campaign | Buyers search before they arrive |
| Online store shipping across Canada | Canada, excluding any area it cannot ship to | Presence | People abroad who are interested in Canada cannot order |

Where geographic targeting stops helping
Location settings decide who is eligible to see an ad, and that is all they decide. They cannot fix an offer that does not suit the area, a landing page that never mentions the places you serve, or a phone number buried at the bottom of the page. They cannot create demand either: if few people in Cochrane search for your service, targeting Cochrane will not change that, which is why keyword research that checks how people search in each place belongs before any geographic split. Paid traffic also stops when the budget does, so local businesses usually pair it with organic search work that keeps them visible between campaigns.

If you would rather have someone check the location settings on your account, Google Ads management at SEO Company To-The-TOP! is handled by one Google Ads certified specialist at a Calgary practice founded in 2007, which serves businesses in Calgary, Edmonton, Vancouver and across Alberta and British Columbia. With any provider, To-The-TOP! included, ask for the management fee and the ad spend as two separate numbers before you compare offers. To talk about the targeting on your campaigns, call (403) 308-5949.
Contact Calgary SEO Company To-The-TOP!
Questions about anything in this article, or about your own rankings? Talk to a Calgary SEO specialist directly.
Phone: (403) 308-5949
Address: 1509 14 Ave SW, Calgary, AB T3C 0W4
Hours:
Monday to Friday: 10:00 am – 7:00 pm
Saturday: 12:00 pm – 4:00 pm
Sunday: closed
